CoS ORL Reference Mapping Table (S-, K-Series)

The CoS ORL reference table uses 48 indexes or virtual rate limiters, and maps each virtual limiter to a physical limiter or resource. An ORL reference table exists for each port group configured, and is indexed similarly to port-resources, as port-group.port-type reference. Because it is an optional configuration, ORL references are not populated with limiters (resources), but can be configured by you. The ORL reference table can be displayed using the show cos reference orl command.

The following example displays default values for the show cos reference orl for port group 0.0 command output:

System(rw)->show cos reference orl 0.0
Group Index Reference Type Rate Limiter
----------- --------- ---- ------------
0.0         0         orl  none
0.0         1         orl  none
0.0         2         orl  none
0.0         3         orl  none
0.0         4         orl  none
0.0         5         orl  none
0.0         6         orl  none
0.0         7         orl  none
.
.
.
0.0         44        orl  none
0.0         45        orl  none
0.0         46        orl  none
0.0         47        orl  none

Physical-Limiter to reference mapping can be configured using the set cos reference orl command. The other references not configured are indicated by rate limiter “none”. To configure a physical limiter to reference mapping, you need to: