This section provides details for the configuration of RADIUS-Snooping on the S- K- and 7100-Series products.
Default Authentication Parameters lists RS parameters and their default values.
Parameter | Description | Default Value |
---|---|---|
RADIUS-Snooping timeout | Specifies the number of seconds that the firmware waits, from the time it successfully snoops a RADIUS request frame, for a RADIUS response frame from the RADIUS server, before terminating the session. | 20 seconds |
RADIUS-Snooping accounting | Specifies whether RADIUS-Snooping accounting is enabled or disabled on the device. | Disabled |
RS system and port state | Enables or disables RS on the distribution-tier switch in a system context or on this port in a port context. One the S- and K-Series, it also enables or disables packet drop in a port context. | Disabled |
authallocated | Specifies the maximum number of allowed RS sessions from all RADIUS clients, on a per port basis. | 8, 128, or 256 depending upon the system license for this device (S-, K-Series) 8 (7100-Series) |
drop | Specifies traffic drop behavior for this port. | Disabled |
index | The numeric ID of a RADIUS-Snooping flow table entry. | None |
UDP port | Specifies the RADIUS UDP port. | 1812 |
secret | Specifies the RADIUS secret for this RADIUS-Snooping flow table entry. | No secret |