Setting MultiAuth Authentication Traps

Traps can be enabled at the system and module levels when the maximum number of users for the system and module, respectively, have been reached. Traps can be enabled at the port level for authentication success, failure, termination and when the maximum number of users have been reached on the port or all supported traps.

MultiAuth Authentication Traps Configuration describes setting the MultiAuth authentication traps.

MultiAuth Authentication Traps Configuration

Step	Task	Command(s)
1	Optionally enable MultiAuth authentication system traps.	set multiauth trap system {enabled | disabled}
2	Optionally enable MultiAuth authentication module traps.	set multiauth trap module {enabled | disabled}
3	Optionally enable MultiAuth authentication port traps.	set multiauth trap port port-string {all | success | failed | terminated | max-reached}
4	Disable MultiAuth authentication traps for the specified trap type.	clear multiauth trap {system | module | port portstring {all | success | failed | terminated | max-reached}}