LLDP Display Commands

The following table lists LLDP show commands. The table indicates which commands are device specific.

LLDP Show Commands

Task	Command
Display LLDP configuration information.	show lldp
Display the LLDP status of one or more ports.	show lldp port status [port-string]
Display the ports that are enabled to send an LLDP notification when a remote system change has been detected or an LLDP-MED notification when a change in the topology has been sensed.	show lldp port trap [port-string]
Display information about which optional TLVs have been configured to be transmitted on ports.	show lldp port tx-tlv [data-center-bridging] [port-string]
Display configured location information for one or more ports.	show lldp port location-info [port-string]
Display the local system information stored for one or more ports.	show lldp port local-info [port-string]
Display the remote system information stored for a remote device connected to a local port.	show lldp port remote-info [port-string]
Display LLDP port network policy configuration information.	show lldp port network policy {all \| voice \| voice-signaling \| guest-voice \| guestvoice-signaling \| software-voice \| video-conferencing \| streaming-video \| videosignaling} [port-string]

Refer to the S-, K-, and 7100 Series CLI Reference Guide for a description of the output of each command.

Published May 2016prev | next