Configuring RADIUS-Snooping on the Distribution-Tier Switch

RADIUS-Snooping Configuration describes how to configure RADIUS-Snooping on the distribution-tier switch.

RADIUS-Snooping Configuration

Step	Task	Command(s)
1	Globally enable MultiAuth for multi mode.	set multiauth mode multi
2	Configure each upstream and downstream port for the auth-opt mode.	set multiauth port mode auth-opt port-string
3	Globally enable RADIUS-Snooping on the distribution-tier switch.	set radius-snooping enable
4	Optionally enable RADIUS-Snooping accounting on the device.	set radius-snooping accounting enable
5	Enable RADIUS-Snooping on each distribution-tier switch port over which RADIUS request and response frames transit. The drop option is supported on the S- and K-Series	set radius-snooping port [enable] [timeout seconds] [drop {enabled | disabled}] [authallocated number] [port-string]
6	Configure RADIUS-Snooping flow table index entries.	set radius-snooping flow index {client-IP-Address server-IP-Address {port} [secret]
7	Optionally modify the RADIUS-Snooping timeout setting.	set radius-snooping timeout seconds