Port-Groups: ORL Configuration (S-, K-Series)

ORL port-groups contain user settings for specific types of ports and their matching outbound rate limiting configurations. Port groups 0.0 through 0.2 exist by default. Each new group can be configured with a name and ports added to each group according to device port-type. Use the show cos port-config orl command to display each ORL port-group configured by group and type, with group name and associated ports.

The following example displays default values for the show cos port-config orl command S-Series output (S-, K-Series):

System(rw)->show cos port-config orl
Outbound Rate Limiting Port Configuration Entries
----------------------------------------------------------------------
Port Group Name  :S-Series 48 ORL
Port Group       :0
Port Type        :0
Assigned Ports   :none
----------------------------------------------------------------------
Port Group Name  :N/A 16 ORL
Port Group       :0
Port Type        :1
Assigned Ports   :none
----------------------------------------------------------------------
Port Group Name  :N/A 4 ORL
Port Group       :0
Port Type        :2
Assigned Ports   :none
----------------------------------------------------------------------

Additional port groups can be created using the set cos port-config orl command. Port group name and associated ports can be configured. You need to: