Host DoS Configuration Example

This example shows how to:

• Globally enables host Dos on this device
• Enable the checkSpoof mitigation type, with a log display rate of 5 per-minute
• Enable the XmasTree mitigation type and disable logging for this threat

  System(rw-config)->hostdos enable
  System(rw-config)->hostDoS spoof rate 5 per-minute
  System(rw-config)->hostdos xmastree nolog
  System(rw-config)->show hostDoS
   hostDoS is globally enabled
   hostDoS icmp-maxlength is 1024
   hostDoS Spoof is enabled , logging is enabled , rate is   5 per-minute
   hostDoS XmasTree   is enabled , logging is disabled, rate is   0 per-second
   hostDoS IcmpFrag   is disabled, logging is enabled , rate is   0 per-second
   hostDoS IcmpFlood  is disabled, logging is enabled , rate is   0 per-second
   hostDoS IcmpSize   is disabled, logging is enabled , rate is   0 per-second
   hostDoS BadSIP     is disabled, logging is enabled , rate is   0 per-second
   hostDoS LANd       is disabled, logging is enabled , rate is   0 per-second
   hostDoS Smurf      is disabled, logging is enabled , rate is   0 per-second
   hostDoS Fraggle    is disabled, logging is enabled , rate is   0 per-second
   hostDoS SynFlood   is disabled, logging is enabled , rate is   0 per-second
   hostDoS PortScan   is disabled, logging is enabled , rate is   0 per-second
   hostDoS TearDrop   is disabled, logging is enabled , rate is   0 per-second
  System(rw-config)->