Port-Groups: IRL Configuration

IRL port-groups contain user settings for specific types of ports and their matching inbound rate limiting configurations. Port groups 0.0 and 0.1 exist by default on the S- and K-Series and port group 0.0 exists by default on the 7100-Series. Each new group can be configured with a name and ports added to each group according to device port-type. Use the show cos port-config irl command to display each IRL port-group configured by group and type, with group name and associated ports.

The following example displays default values for the show cos port-config irl command S-Series output (S-, K-Series):

System(rw)->show cos port-config irl
Inbound Rate Limiting Port Configuration Entries
----------------------------------------------------------------------
Port Group Name  :S-Series 32 IRL
Port Group       :0
Port Type        :0
Assigned Ports   :ge.1.1-60
----------------------------------------------------------------------
Port Group Name  :S-Series 8 IRL
Port Group       :0
Port Type        :1
Assigned Ports   :none
----------------------------------------------------------------------
Port Group Name  :S-Series 24 IRL
Port Group       :0
Port Type        :2
Assigned Ports   :none
----------------------------------------------------------------------

The following example displays default values for the show cos port-config irl command 7100-Series output (7100-Series):

System(rw)->show cos port-config irl
Inbound Rate Limiting Port Configuration Entries
----------------------------------------------------------------------
Port Group Name  :TOR-Series 16 IRL
Port Group       :0
Port Type        :0
Assigned Ports   :tg.1.1-48;fg.1.1-4
----------------------------------------------------------------------

Additional port groups can be created using the set cos port-config irl command. Port group name and associated ports can be configured. You need to: