Configuring NAT

This section provides details for the configuration of NAT on the S-Series products.

Default NAT Parameters lists NAT parameters and their default values.

Default NAT Parameters

Parameter	Description	Default Value
Overload	Specifies that NAPT translation should take place for this dynamic pool binding.	NAT translation
Timeout	Specifies the timeout value applied to dynamic translations.	240 seconds
UDP timeout	Specifies the timeout value applied to the UDP translations.	240 seconds
TCP timeout	Specifies the timeout value applied to the TCP translations.	240 seconds
ICMP timeout	Specifies the timeout value applied to the ICMP translations.	240 seconds
DNS timeout	Specifies the timeout value applied to the DNS translations.	240 seconds
FTP timeout	Specifies the timeout value applied to the FTP translations. (IPv4 only)	240 seconds

NAT Resource Limits lists NAT resource limits.

NAT Resource Limits

Resource	S-Series
Global Bindings	65536
IP Addresses	2000
Pools	10
Port Mapped Addresses	20
Static Rules	1000