Syslog Command Precedence

Syslog Command Precedence lists basic Syslog commands and their order of precedence on Extreme Networks switches.

Syslog Component	Command	Function
Logging defaults	set logging default {[facility facility] [severity severity] [port port]}	Sets default parameters for facility code, severity level and/or UDP port for all Syslog servers and local destinations. Settings will be applied when Syslog servers are configured without specifying values with the set logging server command. This command overrides factory defaults.
Server settings	set logging server index ip-addr ip-addr [facility facility] [severity severity] [descr descr] [port port] state enable \| disable	During or after new server setup, specifies a server index, IP address, and operational state for a Syslog server. Optionally, this command specifies a facility code, severity level at which messages will be accepted, text string description, and/or UDP port for the specified server. This command overrides system defaults for the specified server. If not specified with this or the set logging default command, optional server parameters will be set to the system defaults listed in Syslog Server Default Settings.
Application settings	set logging application {[mnemonic \| all]} [level level] [servers servers]	Sets the severity level at which one or all applications will send messages to Syslog servers. If not specified, settings will apply to all configured servers and severity level will not be changed from system defaults.

Published May 2016prev | next