Default PoE Parameter Values lists PoE parameters and their default values.
Parameter | Description | Default Value |
---|---|---|
Total Power Available | The percentage of total power available that a chassis can withdraw from the total power detected. | 100 |
Power Allocation Mode | The allocation mode for system power available for PoE. | auto |
Power Trap Status | Whether an SNMP trap message is sent when the status of the chassis PoE power supplies or the PoE system redundancy changes. | disable |
Usage Trhld | The PoE usage threshold on a module or a Standalone. | 75% |
PSE Trap Status | Whether an SNMP trap message is sent whenever the status of a module‘s ports changes, or whenever the module‘s PoE usage threshold is crossed. | disable |
Mgmt Mode | The PoE management mode. | realtime |
Admin Status | Whether PoE is enabled on the port. | auto |
Priority | Which ports continue to receive power in a low power situation. | low |
Power Limit | The maximum power, in milliwatts, allowed on a port. | 15400 mW |
Power Capability-Selection | The PoE mode selected for the port. | 8023af |