Implementing Data Center Bridging
This chapter describes how to configure DCB features on Extreme Networks platforms.
- Configure ports for Enhanced Transmission Selection specifying the ETS groups and the bandwidth allocation assigned to each ETS group and optionally advertising the ETS configuration using the LLDP-DCB Enhanced Transmission Configuration and Enhanced Transmission Recommendation TLVs.
- On an
S- and 7100-Series, configure ports for priority-based flow control by enabling
priority-based flow control on a port for specified 802.1p priorities and advertising
the PFC configuration to peers using the LLDP Priority Flow Control TLV.
- Configure ports to advertise an Application Priority setting to the LLDP link peer for the specified application and advertising the Application Priority configuration using the LLDP Application Priority TLV.
- On an S- and 7100-Series, configure switch ports for congestion notification.
You configure DCB features separately and independently. Together the DCB features, on supported platforms, implement DCB.