MLD Display Commands

MLD Show Commands lists MLD show commands.

MLD Show Commands

Task	Command
Display the status of MLD on one or more VLANs.	show mld enable vlan-list
Display the MLD query status of one or more VLANs.	show mld query vlan-list
Display the action to be taken with multicast frames when the multicast MLD flow table is full.	show mld flow-full-action
Display MLD configuration information for one or more VLANs.	show mld config vlan-list
Display MLD information regarding multicast group membership.	show mld groups [group group] [vlan-list vlan-list] [sip sip] [-verbose]
Display static MLD ports for one or more VLANs or MLD groups.	show mld static [group group] [vlan-list vlan-list]
Display the binding of IP protocol ID to MLD classification.	show mld protocols
Display MLD information for a specific VLAN.	show mld vlan [vlan-list]
Display MLD reporter information.	show mld reporters [portlist portlist] [group group] [vlan-list vlan-list] [sip sip]
Display MLD flow information.	show mld flows [portlist portlist] [group group] [vlan-list vlan-list] [sip sip]
Display MLD counter information.	show mld counters
Display the number of MLD flows set on the Extreme Networks S- K- and 7100-Series device.	show mld number-flows
Display configuration information for input filters.	show mld input-filter [filter-id] [rule-id]
Display the action taken when the first frames of a multicast stream are received.	show mld unknown-input-action

Published May 2016prev | next