Flood Control is only supported on port-type 0. Three reference limiters are supported. Use the show cos port-type flood-ctrl command to display the port types and their associated ports.
The following example displays default values for the show cos port-type flood-crtl command S-Series output (S-, K-Series):
System(rw)->show cos port-type flood-ctrl
Number of resources: Supported rate types:
txq = transmit queue(s) perc = percentage
irl = inbound rate limiter(s) pps = packets per second
orl = outbound rate limiter(s) Kbps = kilobits per second
fld = flood rate limiter(s) Mbps = megabits per second
Gbps = gigabits per second
Tbps = terabits per second
Port type Number of Supported Eligible Unselected
Index description limiters rate type ports ports
----- ------------ --------- --------- ----------------- -----------------
0 S-Series 3 fld perc ge.4.1-48; ge.4.1-48;
Flood Ctrl pps ge.6.1-48; ge.6.1-48;
Kbps ge.8.1-48; ge.8.1-48;
Mbps ge.8.101-112 ge.8.101-112
Gbps
The following example displays default values for the show cos port-type flood-crtl command 7100-Series output (7100-Series):
System(rw)->show cos port-type flood-ctrl
Number of resources: Supported rate types:
txq = transmit queue(s) perc = percentage
irl = inbound rate limiter(s) pps = packets per second
orl = outbound rate limiter(s) Kbps = kilobits per second
fld = flood rate limiter(s) Mbps = megabits per second
Gbps = gigabits per second
Tbps = terabits per second
Port type Number of Supported Eligible Unselected
Index description limiters rate type ports ports
----- ------------ --------- --------- ----------------- -----------------
0 TOR-Series 3 fld pps tg.1.1-48; tg.1.1-48;
Flood Ctrl fg.1.1-4 fg.1.1-4
Print
this page
Email this topic
Feedback