Example

The following example configures the basic OSPF topology as displayed in Basic OSPF Topology:

Router 1 CLI Input

Router 1(rw)->configure
Router 1(rw-config)->interface vlan 1
Router 1(rw-config-intf-vlan.0.1)->ipv6 forwarding
Router 1(rw-config-intf-vlan.0.1)->ipv6 ospf 1 area 0.0.0.1
Router 1(rw-config-intf-vlan.0.1)->no shutdown
Router 1(rw-config-intf-vlan.0.1)->exit
Router 1(rw-config)->interface vlan 2
Router 1(rw-config-intf-vlan.0.1)->ipv6 forwarding
Router 1(rw-config-intf-vlan.0.1)->ipv6 ospf 1 area 0.0.0.1
Router 1(rw-config-intf-vlan.0.1)->no shutdown
Router 1(rw-config-intf-vlan.0.2)->exit
Router 1(rw-config)->ipv6 router ospf 1
Router 1(rw-101-config-ospfv3)->router-id 1.1.1.1
Router 1(rw-101-config-ospfv3)->exit
Router 1(rw-config)->

Router 2 CLI Input

Router 2(rw)->configure
Router 2(rw-config)->interface vlan 2
Router 2(rw-config-intf-vlan.0.2)->ipv6 forwarding
Router 2(rw-config-intf-vlan.0.2)->ipv6 ospf 1 area 0.0.0.1
Router 2(rw-config-intf-vlan.0.2)->exit
Router 2(rw-config)->interface vlan 3
Router 2(rw-config-intf-vlan.0.3)->ipv6 forwarding
Router 2(rw-config-intf-vlan.0.3)->ipv6 ospf 1 area 0.0.0.0
Router 2(rw-config-intf-vlan.0.3)->exit
Router 2(rw-config)->ipv6 router ospf 1
Router 2(rw-config-ospfv3)->router-id 2.2.2.2
Router 2(rw-config-ospfv3)->exit
Router 2(rw-config)->