Configuring Security

Default Security Parameters lists Security parameters and their default values.

Default Security Parameters

Parameter	Description	Default Value
MAC locking status	Specifies whether MAC locking is enabled or disabled both globally and on a specific port.	disabled
maximum number of dynamic MAC addresses	Specifies the maximum number of MAC addresses that will be locked on a port configured for dynamic MAC locking.	600
first arrival MAC address aging	Specifies that dynamic MAC locked addresses will be aged after the time set by the MAC agetime configuration.	disabled
MAC lock traps	Specifies whether traps associated with MAC locking will be sent.	disabled
maximum number of static MAC addresses	Specifies the maximum number of static MAC addresses allowed on a port.	64
SSH state	Specifies whether the SSH protocol is enabled or disabled on this device.	disabled
TACACS+ state	Specifies whether the TACACS+ protocol is enable or disabled on this device.	disabled
TACACS+ server timeout	Specifies the TACACS+ server timeout for the all TACACS+ servers.	10 seconds
session privilege level	Specifies the attribute value for the TACACS+ session management privilege level.	read-only = 0 read-write = 1 super-user = 15
TACACS+ single connect state	Specifies whether the TACACS+ single connect feature is enabled or disabled.	disabled