Monitoring VLANs

The following table describes the show commands that display information about VLAN configurations. Refer to S-, K-, and 7100 Series CLI Reference Guide for a description of the output of each show command.

Displaying VLAN Information

Task	Command
Display all existing VLANs.	show vlan
Display VLAN information for a port or range of ports.	show vlan portinfo [port port-string] [vlan vlan]
Display the VLAN constraint setting.	show vlan constraint [vlan id]
Display the VLAN dynamic egress setting.	show vlan dynamicegress [vlan id]
Display all static VLANs.	show vlan static
Display ports assigned to VLANs.	show port vlan [port-string]
Display existing GVRP settings.	show gvrp [port-string]
Display existing MVRP settings.	show mvrp [port-string]
Display MVRP counters information.	show mvrp counters [port-string]
Display existing GVRP VLAN restricted settings.	show gvrp vlan {vlan-list | all} restricted
Display existing MVRP VLAN restricted settings.	show mvrp vlan {vlan-list | all} restricted
Display GARP timer vlaues for one or more ports.	show garp timer [port-string]
Display MRP timer vlaues for one or more ports.	show mrp timer [port-string]
Display IGMP VLAN configuration.	show igmp config [vlan id]
Display IGMP enable state of VLAN.	show igmp enable [vlan id]
Display all groups on a given VLAN.	show igmp groups [vlan id]
Display IGMP VLAN query state.	show igmp query [vlan id]
Display static ports on the given vid, group.	show igmp static [vlan id]