Multi-Topology Display Commands

Multi-Topology Show Commands lists Multi-Topology show commands for S- and K-Series devices. The <topology-name> parameter value is the configured address family topology name.

Multi-Topology Show Commands

Task	Command
Display topology information about an IPv4 BGP router.	show ip bgp multicast
Display topology information about an IPv6 BGP router.	show ipv6 bgp multicast
Display topology information about an IP OSPF router.	show ip ospf interface topology <topology-name>
Display topology information about an IPv6 OSPF router.	show ipv6 ospf interface topology <topology-name>
Display topology information about an IPv4 router.	show ip route topology <topology-name>
Display topology information about an IPv6 router.	show ipv6 route topology <topology-name>

For more information on Multi-Topology CLI commands, refer to S-, K-, and 7100 Series CLI Reference Guide.