Example

The following example provides the input required to configure the designated router topology as displayed in OSPF Designated Router Topology:

Router 1

Router 1(rw)->configure
Router 1(rw-config)->interface vlan 1
Router 1(rw-config-intf-vlan.0.1)->ipv6 ospf priority 25
Router 1(rw-config-intf-vlan.0.1)->exit
Router 1(rw-config)->

Router 2

Router 2(rw)->configure
Router 2(rw-config)->interface vlan 1
Router 2(rw-config-intf-vlan.0.1)->ipv6 ospf priority 10
Router 2(rw-config-intf-vlan.0.1)->exit
Router 2(rw-config)->

Router 3

Router 3(rw)->configure
Router 3(rw-config)->interface vlan 1
Router 3(rw-config-intf-vlan.0.1)->ipv6 ospf priority 30
Router 3(rw-config-intf-vlan.0.1)->exit
Router 3(rw-config)->

Router 4

Router 4(rw)->configure
Router 4(rw-config)->interface vlan 1
Router 4(rw-config-intf-vlan.0.1)->ipv6 ospf priority 0
Router 4(rw-config-intf-vlan.0.1)->exit
Router 4(rw-config)->