Configuring Device maCE1:1

To configure maCE1:1:

• Enable CFM in global configuration mode
• Limit logging to MA maCE1
• Access MD mode for MD mdCE1 using the string-name naming convention
• Set the MD level to 5
• Enable the MD configuration
• Access MA mode for MA maCE1 using the string-name naming convention
• Use the default CCM message interval of 1 second (not configured)
• Configure the MEP list for the two down MEPs: 101, 102, and 103
• Enable the MA configuration
• Access the MA-Comp mode for maCE1
• Set VLAN 100 as the monitored service
• Enable MA-Comp configuration for maCE1
• Access MEP configuration for MEP 101
• Set the MEP port to tg.1.1
• Set the MEP VLAN to 100
• Set the MEP direction to down (optional because down is the direction default)
• Enable the sending of CCM messages for MEP 101
• Set the remote MEP that CCM messages will be sent to 102 and 103
• Activate the MEP state machines
• Enable the MEP configuration