Configuring the MEP Bridge Port

The bridge port the MEP is on must be configured. Use the port command in MEP configuration mode to configure the MEP port.

This example shows how to set tg.1.1 as the port the myMA1 MEP 1000 is attached to:

System(rw-config)->cfm md string-name myMD1
System(su-config-cfm-md.1)->ma string-name myMA1
System(su-config-cfm-ma.1)->mep 1000
System(su-config-cfm-mep.1000)->port tg.1.1
System(su-config-cfm-mep.1000)->enable