Management Authentication Notification MIB Configuration describes how to configure the Management Authentication Notification MIB on an S- K- or 7100-Series device. Management Authentication Notification MIB commands can be entered in any command mode.
By default, all Management Authentication Notification types are enabled.
Step | Task | Command(s) |
---|---|---|
1 | Enable or disable the Management Authentication Notification MIB. By selecting the optional Management access type, you can specifically enable or disable a single access type, multiple access types or all of the access types. | set mgmt-auth-notify {enable | disable} [console] [ssh] [telnet] [web] |
2 | Display the current setting for the Management Authentication Notification MIB. | show mgmt-auth-notify |
3 | If necessary, set the current setting for the Management Authentication Notification access types to the default setting of enabled. | clear mgmt-auth-notify |