CFM Logging Filtering

By default, all CFM MD, MA, and MEP Syslog messages are sent. CFM logging filtering allows you to limit the sending of logged messages by a specified MD, MA or MEP. If an MA or MEP is not specified, Syslog messages are sent for all MAs and MEPs for the specified MD.

Use the cfm logging filter command to filter the sending of CFM Syslog messages to a specified MD, MA and MEP.

This example shows how to configure Syslog to display Syslog messages for all MEPs in the myMA1 maintenance association of the myMD1 maintenance domain:

System(rw-config)->cfm logging filter md string-name myMD1 ma string-name myMA1
System(rw-config)->