Configuring the Cache Server

TWCB Cache Server Configuration describes how to configure a TWCB cache server.

TWCB Cache Server Configuration

Step	Task	Command(s)
1	Create the cache server.	cache ip-address
2	In cache server configuration command mode, optionally apply a configured probe to probe one or probe two to monitor this real server. An ICMP ping and TCP or UDP probe can be configured on separate command lines.	faildetect probe {one | two} probe-name
3	In cache server configuration command mode, optionally specify whether the currently configured probes are active or inactive for this cache server.	faildetect type {none | probe}
4	In cache server configuration command mode, optionally reset failure detection configuration to the factory default settings for this real server.	faildetect reset
5	In cache server configuration command mode, optionally change the port number the assigned probe will monitor for this TWCB cache server context ,	faildetect app-port port-number
6	In cache server configuration command mode, optionally apply a cache weight value to IPv4 or IPv6 cache servers in a web cache server farm	weight weight
7	In cache server configuration command mode, optionally change the maximum number of bindings allowed for this cache server.	maxconns number
8	Optionally, configure a description for this cache server.	description description
9	In cache server configuration command mode, place the cache server in service.	inservice