configure isis metric

configure isis [vlan all | {vlan} vlan_name] metric metric {level[1|2]}

Description

This command sets the narrow metric for one or all IS-IS This command is available on the ExtremeSwitching X440-G2, X450-G2, X460-G2, X465, X590, X620, and X695 series switches.s.

Syntax Description

vlan all Applies the configuration to all IS-IS VLANs.
vlan_name Specifies a single VLAN to which the configuration applies.
metric metric Sets the metric value. The range is 1 to 63.
level [1 | 2] Limits the configuration to either level 1 or level 2. If neither level 1 nor level 2 is specified, the configuration applies to both levels.

Default

10.

Usage Guidelines

If narrow metrics are enabled, this value is used in the associated LSPs for the selected VLANs.

Example

The following command sets the narrow metric for all IS-IS VLANs to 15:

configure isis vlan all metric 15

History

This command was first available in ExtremeXOS 12.1.

Platform Availability

This command is available on platforms with a Core or Premier license as described in the ExtremeXOS 32.1 Feature License Requirements document.