Displays VLAN to Network Service Identifier (NSI) information.
vlan | Specifies VLAN. |
vlan_name | Specifies the name of the VLAN to show NSI information about. |
vlan_id | Specifies the ID of the VLAN to show NSI information about. |
Not specifying a VLAN shows all VLAN to NSI assignment information.
When an assignment is first received by the proxy, it is marked as "Pending". Mappings that are sent to the FA server are updated with the status returned by the server; either "Active" or "Rejected".
The following example shows all VLAN to NSI assignment information:
# show vlan fabric attach assignments Fabric Attach Mode: Server VLAN VLAN Name Type ISID/NSI Status ---- -------------------------------- ------- -------- -------- 4012 NSI_4012Salem Dynamic 4012 Active 10 NSI-31247Salem Static 31247 Pending 1234 NSI-1234-SanJose Dynamic 1234 Rejected 1012 NSI-101010_RDU Static 101010 Active
This command was first available in ExtremeXOS 22.4.
The option mapping was changed to assignments in ExtremeXOS 22.5.
This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, and X695 series switches.