show clear-flow rule-all

Description

Displays all the CLEAR-Flow rules on the switch.

Syntax Description

This command has no arguments or variables.

Default

N/A.

Usage Guidelines

None.

Example

The following display shows output for the command show clear-flow rule-all:

Policy Name    Vlan Name      Port Rule Name  Last Value OP Threshold  TCNT Sec
================================================================================
clearFlow      *              2:1  rule-count 1          >  100        0    11
clearFlow      *              2:1  rule-delta 1          >  1000       0    11
clearFlow      *              2:1  rule-delta 0          >  1000       0    4
clearFlow      *              2:1  rule-delta 0          >  20         0    11
clearFlow      *              2:1  rule-ratio 0          >  10         0    11
clearFlow      *              2:1  rule-ratio 0          >  10         0    4
clearFlow      *              2:26 rule-count 9030635    >  100        1    10
clearFlow      *              2:26 rule-delta 9030635    >  1000       1    10
clearFlow      *              2:26 rule-delta 0          >  1000       0    4
clearFlow      *              2:26 rule-delta 0          >  20         0    10
clearFlow      *              2:26 rule-ratio 0          >  10         0    10
clearFlow      *              2:26 rule-ratio 0          >  10         0    4
clearFlow      Default        *    rule-count 36666439   >  100        1    10
clearFlow      Default        *    rule-delta 36666439   >  1000       1    10
clearFlow      Default        *    rule-delta 0          >  1000       0    4
clearFlow      Default        *    rule-delta 0          >  20         0    10
clearFlow      Default        *    rule-ratio 0          >  10         0    10
clearFlow      Default        *    rule-ratio 0          >  10         0    4
================================================================================
Total Entries: 18
Notation:
TCNT - Number of times expression is continously evaluated to be true
Sec - Number of seconds elapsed from last sampled data

History

This command was first available in ExtremeXOS 11.1.

Platform Availability

This command is available on the ExtremeSwitching X440-G2, X450-G2, X460-G2, X465, X590, X620, and X695 series switches.