This command disables a community entry specified by the community index.
| community_index | Community index in ASCII. |
| hex | Provide value in hexadecimal. |
| hex_community_index | Community index in hexadecimal. |
Enabled.
This command is used to disable a community entry specified by the community index.
disable snmpv3 community hex 61:62:63:64
This command was available in ExtremeXOS 15.6.
This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, and X695 series switches.