Sets the value for Neighbor Discovery Protocol (NDP) reachable time
reachable-time | Specifies setting the NDP reachable time. |
reachable_time | Sets the value for the NDP reachable time (range is 1–1,474,515,000 millisecond or 1–1,474,515 second). |
auto | Specifies having the NDP reachable time set automatically to 3/4 of the configured NDP timeout (default). |
milliseconds | When setting the reachable time value, specifies milliseconds as the time unit (range is 1–1,474,515,000). |
seconds | When setting the reachable time value, specifies seconds (range is 1–1,474,515) as the time unit (default). |
The default setting is for the reachable time to be set automatically to 3/4 of the configured NDP timeout. If you set the time manually, the default unit of measure for the value is seconds.
configure neighbor-discovery cache reachable-time 500000 seconds
This command was first available in ExtremeXOS 11.2.
This command is available on the platforms listed for the IPv6 unicast routing feature in the ExtremeXOS 32.1 Feature License Requirements document.