Enables DHCP on a specified port in a This command is available on the ExtremeSwitching X440-G2, X450-G2, X460-G2, X465, X590, X620, and X695 series switches..
port_list | Specifies the ports for which DHCP should be enabled. |
vlan_name | Specifies the VLAN on whose ports DHCP should be enabled. |
Disabled.
None.
The following command enables DHCP for port 5:9 in VLAN corp:
enable dhcp ports 5:9 vlan corp
This command was first available in ExtremeXOS 11.0.
This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, and X695 series switches.