Displays RIP specific configuration.
This command has no arguments or variables.
N/A.
None.
The following command displays RIP specific configuration:
# show rip
The following is sample output from this command:
# show rip RIP Routing : Disabled Operational status: Down Split Horizon : Enabled Poison Reverse : Enabled Triggered Updates: Enabled Aggregation : Disabled Update Interval : 30 Route Timeout : 180 Garbage Timeout : 120 Router Alert : Disabled Originate Default: Disabled Sys Import-Policy: None Redistribute: Protocol Status Cost Tag Policy ----------------------------------------------------------- Direct Disabled 0 0 none Static Disabled 0 0 none OSPFIntra Disabled 0 0 none OSPFInter Disabled 0 0 none OSPFExt1 Disabled 0 0 none OSPFExt2 Disabled 0 0 none E-BGP Disabled 0 0 none I-BGP Disabled 0 0 none ISISL1 Disabled 0 0 none ISISL2 Disabled 0 0 none ISISL1Ext Disabled 0 0 none ISISL2Ext Disabled 0 0 none
This command was first available in ExtremeXOS 10.1.
This command is available on all platforms with an Edge or Base license or higher as described in the ExtremeXOS 32.1 Feature License Requirements document.