Displays inline power statistics for the specified ports.
port_list | Specifies one or more slots and ports. If you do not specify ports, information for all ports appear. |
N/A.
Disabled.
Searching.
Delivering.
Faulted.
Disconnected.
Other.
Denied.
“-----”: disabled or searching.
“class0”: class 0 device.
“class1”: class 1 device.
“class2”: class 2 device.
“class3”: class 3 device.
“class4”: class 4 device.
Absent—Displays the number of times the port was disconnected.
InvSig—Displays the number of times the port had an invalid signature.
Denied—Displays the number of times the port was denied.
Over-current—Displays the number of times the port entered an overcurrent state.
Short—Displays the number of times the port entered undercurrent state.
The following command displays inline power configuration information for ports 1 to 10 in node (slot) 3 on a SummitStack:
show inline-power stats ports 3:1-10
Following is sample output from this command:
STATISTICS COUNTERS Port State Class Absent InvSig Denied OverCurrent Short 3:1 delivering class3 0 0 0 18 0 3:2 delivering class3 0 0 0 0 0 3:3 searching class0 0 0 0 0 0 3:4 searching class0 0 0 0 0 0 3:5 searching class0 0 0 0 0 0 3:6 searching class0 0 0 0 0 0 3:7 searching class0 0 0 0 0 0 3:8 searching class0 0 0 0 0 0 3:9 searching class0 0 0 0 0 0 3:10 searching class0 0 0 0 0 0
This command was first available in ExtremeXOS 11.1.
This command is available on the This command is available on the ExtremeSwitching X440-G2, X450-G2, X460-G2, X620, and X465 series switches. devices listed in Extreme Networks PoE Devices.