This command configures the Best Master Clock Algorithm (BMCA) as part of gPTP.
network-clock | Network Clock |
gptp | IEEE 802.1AS Generalized Precision Time Protocol |
bmca | Best Master Clock Algorithm |
on | Use BMCA to dynamically port roles. |
off | Disable BMCA and statically set port roles. |
On.
Use this command to configure the BMCA as part of gPTP.
The following example displays output from the show command with BMCA.
# show network-clock gptp gPTP status : Enabled BMCA : [On | Off] Static slave port : 5 (used when BMCA Off) --or-- Static slave port : None (used when BMCA Off) gPTP enabled ports : *1m *21d *22d *47d Flags: (*) Active, (!) Administratively disabled, (d) Disabled gPTP port role, (m) Master gPTP port role, (p) Passive gPTP port role, (s) Slave gPTP port role
This command was first available in ExtremeXOS 15.7.
This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, and X695 series switches.