Displays the ACLs modified by CLEAR-Flow actions.
This command has no arguments or variables.
N/A.
This command displays the ACLs that have been modified by CLEAR-Flow rules that have been triggered.
The following display shows output for the command show clear-flow acl-modified:
Policy Name Vlan Name Port Rule Name Default ACL CF Added Actions Actions ================================================================================ clearFlow * 2:26 acl-rule-4 D QP1 clearFlow * 2:26 acl-rule-3 D D clearFlow * 2:26 acl-rule-2 D M clearFlow * 2:26 acl-rule-1 P clearFlow Default * acl-rule-4 D QP1 clearFlow Default * acl-rule-3 D D clearFlow Default * acl-rule-2 D M clearFlow Default * acl-rule-1 P ================================================================================ Total Entries: 8 Notation: P - Permit, D- Deny, M - mirror enabled, m - mirror disabled
This command was first available in ExtremeXOS 11.1.
This command is available on the ExtremeSwitching X440-G2, X450-G2, X460-G2, X465, X590, X620, and X695 series switches.