Displays the specified access list counters.
countername | Specifies the ACL counter to display. |
port_list | Specifies to display the counters on these ports. |
vlan_name | Specifies to display the counters on the This command is available on the ExtremeSwitching X440-G2, X450-G2, X460-G2, X465, X590, X620, and X695 series switches.. |
ingress | Specifies to display ingress counters. |
egress | Specifies to display egress counters. |
The default direction is ingress.
Use this command to display the ACL counters.
The following example displays all the counters for all ACLs:
# sh access-list counter Policy Name Vlan Name Port Direction Counter Name Packet Count Byte Count ================================================================== temp * 15 ingress mac1 0 mac2 2720 egressdeny * 15 egress mac01count 0 temp * 20 egress mac1 0 mac2 0
This command was first available in ExtremeXOS 10.1.
The egress option was first available in ExtremeXOS 11.3.
This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, and X695 series switches.