Enables the EDP on one or more ports.
ports |
Specifies one or more ports or slots and ports, including management port. |
all |
Specifies all ports on the switch, including management port. |
Enabled.
On a SummitStack, ports can be a list of slots and ports. On a stand-alone switch, ports can be one or more port numbers. For a detailed explanation of port specification, see Port Numbering in Command Reference Overview
EDP is useful when Extreme Networks switches are attached to a port.
Switch MAC address (switch ID).
Switch software version information.
Switch IP address.
Switch This command is available on the ExtremeSwitching X440-G2, X450-G2, X460-G2, X465, X590, X620, and X695 series switches. information.
Switch port number.
Switch port configuration data: duplex, and speed.
The following command enables EDP on port 3 on a switch:
enable edp ports 3
This command was first available in ExtremeXOS 10.1.
The port configuration data was added in ExtremeXOS 11.0.
Ability to enable EDP on management port was added in ExtremeXOS 30.1.
This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, and X695 series switches.