Displays the current RADIUS client dynamic-authorization status.
index | RADIUS server index. |
N/A.
The following sample output displays the current RADIUS dynamic-authorization status:
# show radius dynamic-authorization RADIUS dynamic-authorization: disabled
The following sample output displays the NAS-IP Address requirement set to require (default).
# show radius dynamic-authorization RADIUS dynamic-authorization: enabled RADIUS DynAuth server: 1 Status is Active host name : IP address : 10.51.1.181 Server IP Port: 3799 Protocol : UDP Client address: 10.50.97.80 (VR-Mgmt) shared secret : #$LG11P/fwCjVyH1LlEqSeBrbGr/EXKQ== NAS-IP : Require
This command was first available in ExtremeXOS 22.1.
This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, and X695 series switches.