Configures the settings for the flow key(s) for IPv6.
src-ip | Specifies the source IP address field as part of the flow key. |
src-port | Specifies the L4 source port field as part of the flow key. |
dest-ip | Specifies the destination IP address field as part of the flow key. |
dest-port | Specifies the L4 destination port field as part of the flow key. |
next-hdr | Specifies the next header field as part of the flow key. |
tos | Specifies type of service field as part of the flow key. |
flow-label | Specifies IPv6 flow-label field as part of the flow key. |
All flow keys.
Use this command to specify which of the designated flow-keys to use. This overrides the default which is all keys. The template sent to the Collector (per the IPFIX standard) contains only the keys used. Then, on a per port basis, you can define masks for the IPv6 source and destination address fields, for instance, to aggregate flows based on subnets.
To unconfigure, use the unconfigure ip-fix flow-key command.
To display the configured flow keys, use the show ip-fix command.
The following command configures IPv6 traffic to use the destination IP address and next header:
# configure ip-fix flow-key ipv6 dest-ip next-hdr
This command was first available in ExtremeXOS 12.5.
This command is available on the ExtremeSwitching X460-G2 series switches.