Configures This command is available on the ExtremeSwitching X440-G2, X450-G2, X460-G2, X465, X590, X620, and X695 series switches. ports to stop forwarding the traffic from all multicast groups, unless MLD joins have been received on the port.
vlan_name | Specifies a VLAN name. |
port_list | Specifies one or more ports or slots and ports. On a SummitStack, it can be a list of slots and ports. On a standalone switch, it can be one or more port numbers. May be in the form 1, 2, 3-5, 2:5, 2:6-2:8. |
None.
Use this command to remove the configuration that forwards all multicast groups to the specified VLAN ports.
The following example removes a static MLD entry so all multicast groups are not forwarded to VLAN marketing on ports 2:1-2:4, unless an MLD join is received on the port:
configure mld snooping marketing ports 2:1-2:4 delete static router
This command was first available in ExtremeXOS 11.2.
This command is available on the platforms listed for the IPv6 multicast routing feature in the ExtremeXOS 32.1 Feature License Requirements document.