Shows bridge port extender (BPE) statistics.
vpex | Specifies Virtual Port Extender (VPEX). |
bpe | Bridge port extender (BPE). |
slot | Specifies a specific BPE by slot number. |
slot_num | Specifies a specific BPE by slot number. |
statistics | Specifies BPE statistics information and control plane protocol. |
detail |
Shows detailed BPE statistics information and control plane protocol. When detail is excluded, only non-zero statistics appear; when detail is included, non-zero and zero statistics appear. |
N/A.
This command displays information on a per-BPE basis (cascade ports can be LAG members). If the detail option is not used, only non-zero counts appear.
The following example shows non-detailed statistics information for all BPEs. In this case, there is only one BPE attached at port: 1:45 and assigned to slot 100:
# show vpex bpe statistics BPE Statistics BPE: d8:84:66:88:98:2b Cascade Port: 1:45 Slot: 100 Description: Floor1 txRequests : 23432 rxResponses : 23432 txResponses : 52 rxRequests : 52 rxrqErrors : 0 rxrspErrors : 0 Standard Statistics ------------------- TX Requests RX Responses cspOpen : 1 1 echanRegister : 2 2 orgSpecific : 23429 23429 TX Responses RX Requests cspOpen : 1 1 extPortCreate : 47 47 statusParamSet : 4 4 Organizationally Specific Statistics ------------------------------------ TX Requests RX Responses frmSzeLimSet : 47 47 getBulk : 15488 15488 qCountersGet : 7789 7789 qTrafShaperSet : 51 51 defPrtQoSParSet : 47 47 dtaCtlTrfPriSet : 6 6 ipInterfaceSet : 1 1 RX Requests TX Responses No Valid Statistics
The following example shows detailed statistics information for all BPEs. In this case, there is only one BPE attached at port: 1:45 and assigned to slot 100:
# show vpex bpe statistics detail BPE Statistics BPE: d8:84:66:88:98:2b Cascade Port: 1:45 Slot: 100 txRequests : 23630 rxResponses : 23630 txResponses : 52 rxRequests : 52 rxrqErrors : 0 rxrspErrors : 0 Standard Statistics ------------------- TX Requests RX Responses cspOpen : 1 1 extPortCreate : 0 0 extPortDelete : 0 0 portParamSet : 0 0 portParamGet : 0 0 statusParamSet : 0 0 echanRegister : 2 2 echanRegGet : 0 0 statisticsGet : 0 0 transitDelaySet : 0 0 objectGet : 0 0 objectSet : 0 0 cnParamGet : 0 0 cnParamSet : 0 0 orgSpecific : 23627 23627 unsupported : 0 0 TX Responses RX Requests cspOpen : 1 1 extPortCreate : 47 47 extPortDelete : 0 0 portParamSet : 0 0 portParamGet : 0 0 statusParamSet : 4 4 echanRegister : 0 0 echanRegGet : 0 0 statisticsGet : 0 0 transitDelaySet : 0 0 objectGet : 0 0 objectSet : 0 0 cnParamGet : 0 0 cnParamSet : 0 0 orgSpecific : 0 0 unsupported : 0 0 Organizationally Specific Statistics ------------------------------------ TX Requests RX Responses reload : 0 0 swapImg : 0 0 imageInfoGet : 0 0 trstdPrtInfGet : 0 0 poeParamSet : 0 0 portCfgSet : 0 0 portOpStatGet : 0 0 frmSzeLimSet : 47 47 frmSzeLimGet : 0 0 lagBalAlgSet : 0 0 ecpParamSet : 0 0 cbMsgRefl : 0 0 envGet : 0 0 closeNotif : 0 0 getBulk : 15620 15620 localMirrSet : 0 0 debugInfoGet : 0 0 qCountersGet : 7857 7857 qTrafShaperSet : 51 51 cpuUtilGet : 0 0 diagSet : 0 0 addtlCapSet : 0 0 defPrtQoSParSet : 47 47 dtaCtlTrfPriSet : 6 6 ipInterfaceSet : 1 1 lagSet : 0 0 portCntrClear : 0 0 poeFltReasGet : 0 0 eeeSet : 0 0 poeGlobParmSet : 0 0 tftpDownload : 0 0 sfpNotifSet : 0 0 diagInfoGet : 0 0 unsupported : 0 0 RX Requests TX Responses POE Notif : 0 0 cbMsgRefl : 0 0 sfpNotif : 0 0 unsupported : 0 0
This command was first available in ExtremeXOS 22.5.
This command is available on ExtremeSwitching X465 and X590 series switches.