enable inline-power ports

enable inline-power ports [all | port_list]

Description

Enables This command is available on the ExtremeSwitching X440-G2, X450-G2, X460-G2, X620, and X465 series switches. power currently provided to all ports or to specified ports.

Syntax Description

all Enables inline power to all ports on the switch.
port_list Enables inline power to the specified ports.

Default

Enable.

Usage Guidelines

Disabling inline power to a port immediately removes power to any connected PD. By default, inline power provided to all ports is enabled.

Disabling inline power using the disable inline-power command does not affect the data traffic traversing the port. And, disabling the port using the disable port command does not affect the inline power supplied to the port.

Example

The following command enables inline power to ports 4 and 5 on a switch:

enable inline-power ports 4-5

History

This command was first available in ExtremeXOS 11.1.

Platform Availability

This command is available on the PoE devices listed in Extreme Networks PoE Devices.