Configures the timer value in seconds returned as part of the DHCP response.
| vlan_name | Specifies the This command is available on the ExtremeSwitching X440-G2, X450-G2, X460-G2, X465, X590, X620, and X695 series switches. on whose ports netlogin should be disabled. |
| lease-timer | Specifies the timer value, in seconds. |
N/A.
The timer value is specified in seconds. The timer value range is 0 - 4294967295, where 0 indicates the default (not configured) value of 7200 second.
The following command configures the DHCP lease timer value for VLAN corp:
configure vlan corp dhcp-lease-timer <lease-timer>
This command was first available in ExtremeXOS 11.0.
This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, and X695 series switches.