Configures metering on ingress and/or egress ports.
port_list | Specifies the ports. |
ingress | Specifies ingress ports only. |
egress | Specifies egress ports only. |
ingress-and-egress | Specifies both ingress and egress ports. |
Ingress.
Use this command to configure metering on ingress and/or egress ports.
The following command configures metering on port 2 egress:
# configure ip-fix ports 2 egress
This command was first available in ExtremeXOS 12.5.
This command is available on the ExtremeSwitching X460-G2 series switches.