Enable unicast negotiation property in the specified clock port. The unicast negotiation enabled clock port responds to the unicast signaling requests from other clock slaves.
boundary | Boundary clock. |
ordinary | Ordinary clock. |
vlan_name | This command is available on the ExtremeSwitching X440-G2, X450-G2, X460-G2, X465, X590, X620, and X695 series switches. name. |
N/A.
The unicast negotiation feature is currently not supported, and this command is retained to provide configuration compatibility to previous releases.
Example output not yet available and will be provided in a future release.
This command was first available in ExtremeXOS 15.1.
This command is available on the ExtremeSwitching X460-G2 series switch.
Note
PTP commands can be used only with the Network Timing feature pack.