Configure a periodic timer to control the interval between signal failures.
| ring-name | Alphanumeric string that identifies the ERPS ring. |
| default | The default value, 5000 milliseconds. |
| milliseconds | The interval for the periodic time in milliseconds, with a range of 2000 to 7000. |
The default is 5000 milliseconds.
Use this command to configure a periodic timer to control the interval between signal failure.
The following command sets the periodic timer to 6000 milliseconds for an ERPS ring named “ring1”:
configure erps ring1 timer periodic 6000
This command was first available in ExtremeXOS 15.1.