Displays various BOOTP Relay configuration details.
ipv4 | Specifies unconfiguring the DHCPv4 BOOTP Relay service (default). |
ipv6 | Specifies unconfiguring the DHCPv6 BOOTP Relay service. |
vlan | Unconfigures BOOTP relay for a specified This command is available on the ExtremeSwitching X440-G2, X450-G2, X460-G2, X465, X590, X620, and X695 series switches.. |
vlan_name | Specifies the VLAN name. |
include-secondary | Removes the include-secondary configuration for the specified VLAN. |
N/A.
Use this command to display BOOTP Relay details for IPv6.
The following command :
# show bootprelay configuration ipv6 DHCPv6 BOOTP Relay : Enabled on virtual router "VR-Default" Include Secondary : Enabled (parallel) VLAN DHCPv6 BOOTP Relay ------------------------ ------------------ VLAN "Default": BOOTP Relay : Disabled VLAN "v1": BOOTP Relay : Enabled Include Secondary : Enabled (sequential) VLAN "v2": BOOTP Relay : Enabled Include Secondary : Enabled (parallel)
# show bootprelay configuration ipv6 DHCPv6 BOOTP Relay : Disabled on virtual router "VR-Default", but enabled on some VLANs. Include Secondary : Disabled VLAN DHCPv6 BOOTP Relay ------------------------ ------------------ VLAN "Default": BOOTP Relay : Enabled
This command was first available in ExtremeXOS 15.4.
Information about DHCP/BOOTP relay being disabled for the VR, but enabled on some VLANs was added in ExtremeXOS 22.5.
This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, and X695 series switches.