This command shows ELRP configuration information for all, or specific types of, dynamic This command is available on the ExtremeSwitching X440-G2, X450-G2, X460-G2, X465, X590, X620, and X695 series switches.s.
dynamic-vlans | ELRP configuration options for dynamically created VLANs. |
mvrp | Shows ELRP information for dynamic VLANs created by Multiple VLAN Registration Protocol (MVRP) only. |
netlogin | Shows ELRP information for dynamic VLANs created by Network Login only. |
vm-tracking | Shows ELRP information for dynamic VLANs created by virtual machine MAC tracking only. |
policy | Specifies that the command applies to dynamic VLANs created by One Policy. |
fabric-attach | Specifies that the command applies to dynamic VLANs created by Fabric Attach. |
all | (Default) Shows ELRP information for all dynamic VLANs. |
If you do not specify the type of dynamic VLAN, information about all types appear.
The following example shows ELRP information for all types of dynamic VLANs:
# show elrp dynamic-vlans VM-Tracking : ELRP on client ports : Disabled ELRP on uplink ports : Disabled ELRP on VXLAN RTEPs : Disabled Transmit interval : 1 second(s) Loop detect action : log and trap Port disable on loop : Yes Disabled port : Ingress Disabled duration : 30 seconds Netlogin : ELRP on client ports : Disabled ELRP on uplink ports : Disabled ELRP on VXLAN RTEPs : Disabled Transmit interval : 1 second(s) Loop detect action : log and trap Port disable on loop : Yes Disabled port : Ingress Disabled duration : 30 seconds MVRP : Disabled Transmit interval : 1 second(s) Loop detect action : log and trap Port disable on loop : Yes Disabled port : Ingress Disabled duration : 30 seconds Policy : Enabled Transmit interval : 1 second(s) Loop detect action : log and trap Port disable on loop : Yes Disabled port : Ingress Disabled duration : 30 seconds Fabric-Attach : Disabled Transmit interval : 1 second(s) Loop detect action : log and trap Port disable on loop : Yes Disabled port : Ingress Disabled duration : 30 seconds
The following example shows ELRP information for dynamic VLANs created by virtual machine MAC tracking only:
# show elrp dynamic-vlans vm-tracking VM-Tracking: ELRP for dynamic VLANs : Enabled ELRP on client ports : Enabled ELRP on uplink ports : Enabled
The following example shows ELRP information for dynamic VLANs created by One Policy:
# show elrp dynamic-vlans policy Policy : Enabled Transmit interval : 1 second(s) Loop detect action : log and trap Port disable on loop : Yes Disabled port : Ingress Disabled duration : 30 seconds
The following example shows ELRP information for dynamic VLANs created by Fabric Attach:
show elrp dynamic-vlans fabric-attach Fabric-Attach : Disabled Transmit interval : 1 second(s) Loop detect action : log and trap Port disable on loop : Yes Disabled port : Ingress Disabled duration : 30 seconds
This command was first available in ExtremeXOS 22.2.
Loop detection action information was added in ExtremeXOS 22.3.
The policy and fabric-attach keywords were added in ExtremeXOS 31.4.
This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, and X695 series switches.