Configures the source IP address used to communicate to the collector.
ipaddress | Specifies the source IP address to be used in IPFIX packets. |
vrname | Specifies a virtual router name. |
Switch IP address of the interface the traffic egresses.
Use this command to specify the source IP address and VR to use when sending from the switch to a given collector. Otherwise, the default is used.
There is one collector.
To reset to the default of the switch IP address, use the unconfigure ip-fix ip-address command.
The following command configures an IP address of 1.1.1.1 and VR of finance:
# configure ip-fix source ip-address 1.1.1.1 finance
This command was first available in ExtremeXOS 12.5.
This command is available on the ExtremeSwitching X460-G2 series switches.