Displays the configured ZTC mappings for Fabric Attach Zero Touch Clients.
zero-touch-client | Displays Zero Touch Clients. |
If no mapping is present, no information will be displayed for the client type.
This command is only used when mappings are present.
The following example displays configured Fabric Attach Zero Touch Clients:
# show fabric attach zero-touch-client Client Name VLAN Name NSI/I-SID Priority Status ------------------- -------------------------------- --------- -------- -------- wap-type1 VLAN_123 11111 dot1p Enabled camera VLAN_200 2000 5 Disabled ona-spb-over-ip VLAN_4001 40001 7 Enabled
This command was first available in ExtremeXOS 31.3.
This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, and X695 series switches.