Shows the NTP access list of the current system based on the source IP blocks.
user | Displays the NTP access list of the current user. |
system | Displays the for the current system. |
all | Displays both user and system data. |
vr | Specifies showing NTP information for a given VR. |
vr_name | Specifies which VR to show information about. If a VR name is not specified, the VR of the current command context is used. |
Displays all by default.
N/A.
The following command displays all NTP access list information for VR "VR-Mgmt":
# show ntp restrict-list user vr "VR-Mgmt" VR Name IP Address Mask Count Type Action ======================================================================== VR-Mgmt 1.1.1.1 255.255.255.255 0 User Permit
This command was first available in ExtremeXOS 12.7.
The vr keyword was added in ExtremeXOS 22.2.
This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, and X695 series switches.